|
Spark Plug Wire, Terminals and other stuff: Spark plug wire to fit the old applications. Stranded wire core with lacquered cotton braid or solid color PVC or original synthetic rubber. We will also have some sets available or can make a set to fit your application.--You may request a quote for a set at any time. If you have a Chevrolet from 1929-39 click here.
Above colors are approximate. They may vary slightly depending upon the dye lot. Black rubber/ PVC............................................#7MMSB $1.00/foot Red rubber/ PVC (not pictured/when available)....#7MMSR $1.00/foot
Below is reproduction old style lacquered cloth wire: Oak with black and red tracers.............................#7MMOBRT $1.25/foot Oak with black tracers................................7mm #7MMOBT $1.25/foot 9mm #9MMOBT $2.00/foot
Yellow with black and red tracers..........................#7MMYBRT $1.25/foot
Red with black and yellow tracers..........................#7MMRBYT $1.25/foot
Black ........................................................7mm #7MMBLC $1.25/foot 9mm #9MMBLC $2.00/foot
Below are spark plug wire ends, distributor cap wire ends, boots and brass thumb nuts that we stock. Some of these are a limited supply. We can also special order other solder on and Rajah take apart terminals. Please use our request form if interested. Spark Plug Wire Terminals for 7MM wire
90 Degree steel crimp.............................#90DSC $1.00 ea. 90 Degree steel chrome cage solder..........#90DSCCS $2.25 ea. 90 Degree steel crimp boot style...............#90DSCBS $1.00 ea. 90 Degree steel gold anodized crimp..........#90DSGAC $1.50 ea. Straight steel crimp..................................#SSC $1.00 ea. Straight steel chrome cage solder...............#SSCCS $2.25 ea. Steel bendable crimp.................................#SBC $1.00 ea. Forked steel crimp (good)...........................#FSC $1.50 ea. Forked steel chrome solder (better)..............#FSCS $2.25 ea.
Distributor Cap & Coil Terminals 7MM / Brass Thumb Nuts
Better distributor cap or coil terminal............................#BDCCT $1.00 ea. Standard distributor cap or coil terminal.........................#SDCCT $0.50 ea. M4 metric thread spark plug thumb nut for new style spark plugs for use with forked terminals........................#M4nut $1.00 ea.
8/32 thread spark plug thumb nut for original Champion X and 3X plus other spark plugs that used thumb nuts and forked terminals.....................................................#8/32SPBN $1.00 ea.
8/32 thread buzz coil and battery box brass thumb nut.......#8/32LBCBN $1.00 ea.
Distributor Cap, Coil and Spark Plug Boots 7 MM
Reproduction distributor cap boot........................#7MMDCB $1.00 ea.
Original old style coil boot (limited supply)...........#7MMCBOS $1.00 ea.
Reproduction new style coil boot..........................#7MMCBNS $1.00 ea.
Reproduction straight spark plug boot....................#7MMSPBS $1.00 ea.
Reproduction 90 degree spark plug boot for use with 90 Degree steel crimp boot style terminal.........#7MM90SPB $1.00 ea.
|